Soybean inoculants
for seeds
Packaging
• 300 cm3 sachets (for 100 kg of seeds) in 20-sachet boxes.
• 1,500 cm3 sachets (for 500 kg. of seeds) in 6-sachet boxes.
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: more than 1 x 109 (1,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
150 cm3 per 50 kg of seeds.
In areas that have not been sown with soya before: 300 cm3 per 50 kg of seeds.
Application
Shake well before opening.
For inoculation at sowing time: pour the inoculant over the seeds, respecting the indicated dose and mix until the product is homogeneously distributed.
For pre-inoculation: Mix inoculate with the eneDos additive-protectant and inoculate it with the mixture.
Keep the treated seeds in a fresh and airy environment. Pre-inoculation can be done up to 15 days before sowing (See Inoculation Packs: Pre-inoculation).
Storage
ene-2 liquid inoculant must be stored in its original packaging in a fresh and airy environment. Temperature should not be higher than 25ºC.
Compatibility
Compatible with eneDos Seed fungicide and eneDos Additive-protectant. In case of using any other product, ask the Technical Staff at ARBO Laboratories.
Packaging
• Fourteen 500 cm3 sachets (for 500 kg of seeds each) in carboard boxes.
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 3 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
50 cm3 per 50 kg of seeds. It must be dissolved in water or sugared water to wet the seeds equally. Dissolution dose is 100 cm3 (minimum quantity) of clean water (NOT TAP WATER) + 50 cm3 of inoculant.
In areas that have not been sown with soya before: double dose (100 cm3 per 50 kg of seeds).
Application
Shake well before opening.
For inoculation at sowing time: pour the concentrated inoculant over the seeds, respecting the indicated dose and mix until the product is homogeneously distributed.
For pre-inoculation: Mix with the eneDos additive-protectant and inoculate seeds with the mixture.
Keep the treated seeds in a fresh and airy environment. Pre-inoculation can be done up to 15 days before sowing (See Inoculation Packs: Pre-inoculation).
Storage
ene-2 Liquid inoculant must be stored in its original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
Compatibility
Compatible with eneDos Seed fungicide and eneDos Additive-protectant. In case of using any other product, ask the Technical Staff at ARBO Laboratories.
In-furrow
Bucket for 20-hectare soya inoculation.
To inoculate the soil at sowing time.
Packaging
Bucket containing 3 bags of in-furrow inoculant x 3,000 cm3 + 1 instruction sheet
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 1 x 109 (1,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed
Dose
450 cm3 of ene-2 in-furrow inoculant per hectare.
Application
Add the necessary amount of fresh and chlor-less well water to the inoculation machine tank to treat 20 hectares of soya. The amount of water will depend on the liters per hectare your machine releases (See example below).
• Take the bag inoculant from the bucket.
• Shake the bag so that the inoculant is mixed properly.
• Add the 9 liters of inoculant to the inoculation machine tank and stir the liquid.
• The Ene-2 liquid in-furrow inoculant can be easily stirred and it does not decant.
• Sow and inoculate the soil simultaneously. Check that the temperature of the product does not rise above 30ºC.
Example: If your in-furrow inoculation machine releases 20 liters per hectare, you should prepare 400 liters of mixture. Mix the 9 liters of inoculant with 391 liters of water. This treats 20 hectares. The mixture must be used within 6-8 hours from preparation to preserve the product quality.
Storage
The ene-2 in-furrow inoculant must be stored in its original packaging in a fresh and airy environment. Temperature should not be higher than 25ºC.
Soybean inoculation packs
Inoculation and curing (fungicide treatment)
For treating seeds at sowing time.
Blue lid bucket for treating 3,000 kg of soybean seeds.
Packaging
Bucket containing:
• 4 sachets of ene-2 concentrated inoculant x 1,500 cm3.
• 2 doy-packs of eneDos seed fungicide x 1,600 cm3.
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 1 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
Inoculante ene-2: 150 cm3 every 50 kg of seeds.
ene-2 seed curer: 80 cm3 every 50 kg of seeds.
In areas that have not been sown with soya before: double dose of inoculant (225 cm3 per 50 kg of seeds).
Application
• Take the sachets and plastic dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the 4 sachets into the bucket.
• Once the 9,200 cm3 (6,000 cm3 of inoculant + 3,200 cm3 of seed fungicide) are inside the bucket, stir the mixture until the products are homogeneously distributed. This mixture treats up to 2,000 kg of soya. It is advisable to use 230 cm3 of mixture every 50 kg of seeds. The mixture must be used within 2-3 hours from preparation.
• Inoculate the seeds.
• Sow them on the same day.
Storage
The ene-2 inoculation packs must be stored in their original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
For treating seeds at sowing time.
Black lid bucket for treating 3,000 kg of soybean seeds.
Packaging
Bucket containing:
• 6 sachets of ene-2 Concentrated inoculant x 500 cm3.
• 3 doy-packs of eneDos Seed fungicide x 1,600 cm3
• 1 plastic dispenser
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 3 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
ene-2 inoculant: 50 cm3 every 50 kg of seeds.
eneDos seed fungicide: 80 cm3 every 50 kg of seeds.
In areas that have not been sown with soya before: double dose (100 cm3 per 50 kg of seeds).
Application
• Take the sachets and plastic dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the 6 sachets into the bucket.
• Once the 7,800 cm3 (3,000 cm3 of inoculant + 4,000 cm3 of seed fungicide) are inside the bucket, stir the mixture until the products are equally distributed. This mixture treats up to 3,000 kg of soya. It is advisable to use 130 cm3 of mixture every 50 kg of seeds. The mixture must be used within 2-3 hours from preparation.
• Inoculate the seeds.
• Sow them on the same day.
NB: you can add clean and chlor-less water to the mixture to make it more fluid. Adding 1,200 cm3 of water to the mixture, you will have 9 liters of the product. In this case, you should use 160 cm3 of the mixture every 50 kg of seed.
Storage
The ene-2 inoculation packs must be stored in their original packs in a fresh and airy environment. Temperature should not be higher than 25ºC.
Inoculant + Protectant
For treating seeds up to 15 days before sowing.
Green lid bucket for treating 2,000 kg of soybean seeds.
Packaging
Bucket containing:
• 2 bags of ene-2 Conventional inoculant x 3000 cm3
• 2 sachets of eneDos Additive-protectant x 850 cm3
• 1 plastic dispenser
• 1 instruction sheet
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 1 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
ene-2 inoculant: 150 cm3 every 50 kg of seeds.
eneDos additive-protectant: 42.2, 85 or 170 cm3 to pre-inoculate up to 15, 21 or 30 days before sowing.
In areas that have not been sown with soya before: double dose of inoculant (300 cm3 per 50 kg of seeds).
Application
• Take the sachets and dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the sachets into the bucket (both inoculant and protectant).
• This mixture (7,700 cm3) treats up to 2,000 kg of soya. It is advisable to use 195 cm3 of mixture every 50 kg of seeds (using the measure glass). The mixture must be used within 2-3 hours from preparation. You can add clean and chlor-less water to the mixture to make it more fluid. Adding 300 cm3 of water to the mixture, you will have 8 liters of the product. In this case, you should use 200 cm3 of the mixture every 50 kg of seed.
• The mixture must be used up to 24 hours from preparation.
• Once the seeds have been treated, let them air-dry until they are dry on the surface, and store them until sowing time (up to 15 days after inoculation).
If you wish to pre-inoculate your seeds up to 30 days before sowing, you should add 2 more sachets of additive-protectant to the mixture (ask your provider for more sachets). In this case, 4 sachets of concentrated inoculant + 4 sachets of additive-protectant will add up 9,400 cm3 of mixture and you should use 235 cm3 of mixture every 50 kg of seeds.
Storage
The ene-2 Iinoculation packs must be stored in their original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
For treating seeds up to 15 days before sowing.
Yellow lid bucket for treating 4,000 kg of soybean seeds.
Packaging
Bucket containing:
• 8 sachets of ene-2 Concentrated inoculant x 500 cm3
• 4 sachets of eneDos Additive-protectant x 850 cm3
• 1 plastic dispenser
• 1 instruction sheet
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 3 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
ene-2 inoculant: 50 cm3 every 50 kg of seeds.
eneDos additive-protectant: 42.5, 85 or 170 cm3 to pre-inoculate up to 15, 21 or 30 days before sowing.
In areas that have not been sown with soya before: double dose of inoculant (100 cm3 per 50 kg of seeds).
Application
• Take the sachets and dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the 4 sachets of inoculant and the 2 sachets of additive-protectant into the bucket.
• Stir the mixture until the products are adequately distributed.
• This mixture treats up to 2,000 kg of soybean seeds. You can add 2,300 cm3 of clean and chlor-less water to the mixture to make it more fluid. Adding 2,300 cm3 of water to the mixture, you will have 6 liters of the product. In this case, you should use 150 cm3 of the mixture every 50 kg of seed.
• The mixture must be used up to 24 hours from preparation.
• Once the seeds have been treated, let them air-dry until they are dry on the surface, and store them until sowing time (up to 15 days after inoculation).
• Repeat the procedure with the sachets left.
If you wish to pre-inoculate your seeds up to 30 days before sowing, you should add 4 more sachets of additive-protectant to the mixture (ask your provider for more sachets). In this case, 4 sachets of concentrated inoculant + 4 sachets of additive-protectant will add up 5,400 cm3 of mixture and you should use 135 cm3 of mixture every 50 kg of seeds. It is not essential to add water.
Storage
The ene-2 Inoculation packs must be stored in their original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
Inoculant + Protectant + Fungicide treatment
For treating seeds up to 15 days before sowing.
Red lid bucket for treating 2,000 kg of soybean seeds.
Packaging
Bucket containing:
• 1 bag of ene-2 Conventional inoculant x 3000 cm3
• 1 doy-pack of eneDos Seed fungicide x 1600 cm3
• 1 sachet of eneDos Additive-protectant x 850 cm3
• 1 plastic dispenser
• 1 instruction sheet
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 1 x 109 (1,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
ene-2 inoculant: 150 cm3 every 50 kg of seeds.
eneDos additive-protectant: 42.5, 85 or 170 cm3 to pre-inoculate up to 15, 21 or 30 days before sowing.
eneDos seed fungicide: 80 cm3 every 50 kg of seeds.
In areas that have not been sown with soya before: double dose of inoculant (300 cm3 per 50 kg of seeds).
Application
• Take the sachets and dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the inoculant and protectant sachets into the bucket.
• Stir the mixture and let the protectant act for 15 to 20 minutes.
• Add the seed curer and shake until the product is equally distributed. This mixture (5,450 cm3) treats up to 1,000 kg of soya. It is advisable to use 272.5 cm3 of mixture every 50 kg of seeds (using the measure glass). The mixture can be used up to 12 hours from preparation.
• Inoculate the seeds respecting the indicated dose.
• Once the seeds have been treated, let them air-dry until they are dry on the surface, and store them until sowing time (up to 15 days after inoculation).
If you wish to pre-inoculate your seeds up to 30 days before sowing, you should add 1 sachet of additive-protectant more to the mixture (ask your provider for more sachets). In this case, 2 sachets of inoculant + 2 sachets of additive-protectant + 1 sachet of seed curer will add up 6,300 cm3 of mixture and you should use 315 cm3 of mixture every 50 kg of seeds.
Storage
The ene-2 Inoculation packs must be stored in their original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
For treating seeds up to 15 days before sowing.
White lid bucket for treating 2,000 kg of soybean seeds.
Packaging
Bucket containing:
• 4 sachets of ene-2 Concentrated inoculant x 500 cm3
• 2 doy-packs of eneDos Seed fungicide x 1,600 cm3
• 2 sachets of eneDos Additive-protectant x 850 cm3
• 1 plastic dispenser
• 1 instruction sheet
Composition
Active principle: Bradyrhizobium japonicum, selected for its infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for all varieties of soya (Glycine max) cultivated in the country.
Aqueous vehicle.
Minimum concentration: 3 x 109 (3,000,000,000) infectious and efficient Bradyrhizobium japonicum cells per every cm3 of inoculant till expiration date. It provides more than 600,000 live bacteria per seed.
Dose
ene-2 inoculant: 50 cm3 every 50 kg of seeds.
eneDos additive-protectant: 42.5, 85 or 170 cm3 to pre-inoculate up to 15, 21 or 30 days before sowing.
eneDos Seed fungicide: 80 cm3 every 50 kg of seeds.
In areas that have not been sown with soya before: double dose of inoculant (100 cm3 per 50 kg of seeds).
Application
• Take the sachets and dispenser from the bucket.
• Shake the sachets so that the product is mixed.
• Pour the content of the 4 sachets of inoculant and the 2 sachets of additive-protectant into the bucket.
• Stir the mixture until the products are equally distributed and let the additive-protectant act for 15 to 20 minutes.
• Add the 2 sachets of seed curer and shake until the products are equally distributed. This mixture (6,900 cm3) treats up to 2,000 kg of soybean seeds. You should use 172.5 cm3 of the mixture every 50 kg of seed, using the measure glass.
• The mixture must be used up to 12 hours from preparation.
• Inoculate the seeds respecting the indicated dose.
• Once the seeds have been treated, let them air-dry until they are dry on the surface, and store them until sowing time (up to 15 days after inoculation and curing).
If you wish to pre-inoculate and cure your seeds up to 30 days before sowing, you should add 2 more sachets of additive-protectant to the mixture (ask your provider for more sachets). In this case, 4 sachets of inoculant + 4 sachets of additive-protectant + 2 sachets of seed curer will add up 8,600 cm3 of mixture and you should use 215 cm3 of mixture every 50 kg of seeds.
Storage
The ene-2 Inoculation packs must be stored in their original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
Inoculant+protector+fungicide+insecticide
Para tratar las semillas hasta 7 días antes de la siembra.
Balde tapa roja I para tratar 1000 Kg de semillas de soja.
Presentación
Balde conteniendo:
• 1 vejiga de inoculante convencional ene-2 x 3000 cm3.
• 1 sachet Aditivo-protector eneDos x 850 cm3.
• 1 doy-pack de curasemillas eneDos x 1600 cm3.
• 1 botella de insecticida Imidacloprid 60 x 500 cm3.
• 1 vaso graduado para dosificación.
• 1 instructivo.
Composición
Principio Activo: Bradyrhizobium japonicum, seleccionadas por su capacidad de infección y gran efectividad.
Bacterias fijadoras de nitrógeno infectivas y eficientes para todas las variedades de soja (Glycine max) cultivadas en el país.
Concentración mínima: 1 x 109 (1.000.000.000) células de Bradyrhizobium japonicum por cm3 de inoculante hasta la fecha de vencimiento, infectivas y efectivas. Provee más de 600.000 bacterias vivas por semillas.
Dosis
Inoculante ene-2: 150 cm3 por cada 50 kg de semillas.
Aditivo-protector eneDos: 42,5 cm3 para preinocular hasta 7 días antes de la siembra.
Curasemillas eneDos: 80 cm3 por cada 50 kg de semillas.
Insecticida Imidacloprid 60: 25 cm3 por cada 50 kg de semillas.
Forma de Aplicación
• Retire los sachets, botellas y el vaso medidor del interior del balde.
• Homogeinice el contenido de los envases agitándolos fuertemente.
• Corte el borde superior del sachet de protector, abra el envase de inoculante y vuelque los contenidos de ambos productos dentro del balde.
• Mezcle ambos productos con una varilla limpia y deje actuar el protector por 15-20 minutos.
• Agregue luego el contenido de la botella de insecticida y del sachet de curasemillas y agite nuevamente hasta obtener una mezcla homogénea.
• Este volumen de mezcla (5950 cm3) alcanza para preinocular y curar 1000 kg de semillas de soja.
• Deben utilizarse aproximadamente 297,5 cm3 de mezcla por cada 50 kg de semillas empleando para esta dosificación el vaso medidor.
La mezcla inoculante + protector + curasemillas + insecticida puede ser utilizada hasta 4 horas luego de preparada.
• Inocule las semillas respetando las dosis arriba indicadas.
• Una vez tratadas las semillas déjelas orear hasta notar que están secas al tacto y almacénelas hasta el momento de la siembra (hasta 7 días luego de inoculadas y curadas).
• En caso de sembrar el mismo día que se tratan las semillas también es imprescindible orear las mismas para evitar inconvenientes en la sembradora. En este caso recomendamos reducir la dosis de protector a la mitad (o tercera parte) para facilitar el oreo.
Conservación
Los paquetes de inoculación ene-2 deben conservarse en su envase original en ambientes frescos y ventilados. Es conveniente que la temperatura ambiente no supere los 25°C.
Para tratar las semillas hasta 7 días antes de la siembra.
Balde tapa blanca I + M para tratar 2000 kg de semillas de soja.
Presentación
Balde conteniendo:
• 4 sachets de inoculante concentrado ene-2 x 500 cm3.
• 2 sachet Aditivo-protector eneDos x 850 cm3.
• 1 botella curasemillas metalaxil M. 35% x 250 cm3.
• 1 botella de insecticida Imidacloprid 60 x 1000 cm3.
• 1 vaso graduado para dosificación.
• 1 instructivo.
Composición
Principio Activo: Bradyrhizobium japonicum, seleccionadas por su capacidad de infección y gran efectividad.
Bacterias fijadoras de nitrógeno infectivas y eficientes para todas las variedades de soja (Glycine max) cultivadas en el país.
Concentración mínima: 3 x 109 (3.000.000.000) células de Bradyrhizobium japonicum por cm3 de inoculante hasta la fecha de vencimiento, infectivas y efectivas. Provee más de 600.000 bacterias vivas por semillas.
Dosis
Inoculante ene-2: 50 cm3 por cada 50 kg de semillas.
Aditivo-protector eneDos: 42,5 cm3 para preinocular hasta 7 días antes de la siembra.
Curasemillas Metalaxil M. 35%: 6,25 cm3 por cada 50 kg de semillas.
Insecticida Imidacloprid 60: 25 cm3 por cada 50 kg de semillas.
Forma de Aplicación
• Retire los sachets, botellas y el vaso medidor del interior del balde.
• Homogeinice el contenido de los envases agitándolos fuertemente.
• Corte el borde superior de los sachets de protector, abra los envases de inoculante y vuelque los contenidos de ambos productos dentro del balde.
• Mezcle ambos productos con una varilla limpia y deje actuar el protector por 15-20 minutos.
• Agregue luego el contenido de las botellas de insecticida y curasemillas y agite nuevamente hasta obtener una mezcla homogénea.
• Este volumen de mezcla (4950 cm3) alcanza para preinocular y curar 2000 kg de semillas de soja.
• Deben utilizarse aproximadamente 124 cm3 de mezcla por cada 50 kg de semillas empleando para esta dosificación el vaso medidor.
La mezcla inoculante + protector + curasemillas + insecticida puede ser utilizada hasta 4 horas luego de preparada.
• Inocule las semillas respetando las dosis arriba indicadas.
• Una vez tratadas las semillas déjelas orear hasta notar que están secas al tacto y almacénelas hasta el momento de la siembra (hasta 7 días luego de inoculadas y curadas).
• En caso de sembrar el mismo día que se tratan las semillas también es imprescindible orear las mismas para evitar inconvenientes en la sembradora. En este caso recomendamos reducir la dosis de protector a la mitad (o tercera parte) para facilitar el oreo.
• Para lograr un eficiente mojado de las semillas es conveniente agregar a la mezcla (una vez preparada) 2 litros de agua libre de cloro.
De esta forma se deben agregar aproximadamente 175 cm3 de mezcla diluida cada 50 kg de semillas.
Conservación
Los paquetes de inoculación ene-2 deben conservarse en su envase original en ambientes frescos y ventilados. Es conveniente que la temperatura ambiente no supere los 25°C.
Inculant+PGPR
Para tratar las semillas hasta 10 días antes de la siembra.
Balde tapa verde Plus para tratar 1000 kg de semillas de soja.
Presentación
Balde conteniendo:
• 1 vejiga de inoculante convencional ene-2 x 3000 cm3.
• 1 vejiga de promotor de crecimiento Endophyte Plus x 3000 cm3.
• 1 sachet Aditivo-protector eneDos x 850 cm3.
• 1 vaso graduado para dosificación.
• 1 instructivo.
Composición
Principios Activos: Bradyrhizobium japonicum, seleccionadas por su capacidad de infección y gran efectividad. Bacterias fijadoras de nitrógeno infectivas y eficientes para todas las variedades de soja (Glycine max) cultivadas en el país.
Gluconacetobacter diazotrophicus, seleccionadas por su capacidad de promoción de crecimiento en una gran diversidad de cultivos.
Concentración mínima: 1 x 109 (1.000.000.000) células de Bradyrhizobium japonicum por cm3 de inoculante hasta la fecha de vencimiento, infectivas y efectivas. Provee más de 600.000 bacterias vivas por semillas.
3 x 109 (3.000.000.000) células de Gluconacetobacter diazotrophicus por cm3 de fertilizante biológico.
Dosis
Inoculante ene-2: 150 cm3 por cada 50 kg de semillas.
Promotor de Crecimiento Endophyte Plus: 150 cm3 por cada 50 kg de semillas.
Aditivo-protector eneDos: 42,5 cm3 para preinocular hasta 10 días antes de la siembra.
Forma de Aplicación
• Retire los sachets y el vaso medidor del interior del balde.
• Homogeinice el contenido de los sachets agitándolos fuertemente.
• Vuelque los contenidos de los envases de ambos inoculantes y protector dentro del balde.
• Mezcle los productos con una varilla limpia y deje actuar el protector por 15-20 minutos.
• Este volumen de mezcla (6850 cm3) alcanza para coinocular y curar 1000 kg de semillas de soja.
• Deben utilizarse 342,5 cm3 de mezcla por cada 50 kg de semillas empleando para esta dosificación el vaso medidor.
La mezcla inoculante + promotor de crecimiento + protector puede ser utilizada hasta 8 hs. luego de preparada.
• Inocule las semillas respetando las dosis arriba indicadas.
• Una vez tratadas las semillas déjelas orear hasta notar que están secas al tacto y almacénelas hasta el momento de la siembra (hasta 10 días luego de coinoculadas y curadas).
Para tratar las semillas hasta 10 días antes de la siembra.
Balde tapa roja Plus para tratar 1000 kg de semillas de soja.
Presentación
Balde conteniendo:
• 1 vejiga de inoculante convencional ene-2 x 3000 cm3.
• 1 vejiga de promotor de crecimiento Endophyte Plus x 3000 cm3.
• 1 sachet Aditivo-protector eneDos x 850 cm3.
• 1 doy-pack de curasemillas eneDos x 1600 cm3.
• 1 vaso graduado para dosificación.
• 1 instructivo.
Composición
Principios Activos: Bradyrhizobium japonicum, seleccionadas por su capacidad de infección y gran efectividad. Bacterias fijadoras de nitrógeno infectivas y eficientes para todas las variedades de soja (Glycine max) cultivadas en el país.
Gluconacetobacter diazotrophicus, seleccionadas por su capacidad de promoción de crecimiento en una gran diversidad de cultivos.
Concentración mínima: 1 x 109 (1.000.000.000) células de Bradyrhizobium japonicum por cm3 de inoculante hasta la fecha de vencimiento, infectivas y efectivas. Provee más de 600.000 bacterias vivas por semillas.
3 x 109 (3.000.000.000) células de Gluconacetobacter diazotrophicus por cm3 de fertilizante biológico.
Dosis
Inoculante ene-2: 150 cm3 por cada 50 kg de semillas.
Promotor de Crecimiento Endophyte Plus: 150 cm3 por cada 50 kg de semillas.
Aditivo-protector eneDos: 42,5 cm3 para preinocular hasta 10 días antes de la siembra.
Curasemillas eneDos: 80 cm3 por cada 50 kg de semillas.
Forma de Aplicación
• Retire los sachets y el vaso medidor del interior del balde.
• Homogeinice el contenido de los sachets agitándolos fuertemente.
• Vuelque los contenidos de los envases de ambos inoculantes y protector dentro del balde.
• Mezcle los productos con una varilla limpia y deje actuar el protector por 15-20 minutos.
• Agregue luego el contenido del sachet de curasemillas y agite nuevamente hasta obtener una mezcla homogénea.
• Este volumen de mezcla (8450 cm3) alcanza para coinocular y curar 1000 kg de semillas de soja.
• Deben utilizarse 422,5 cm3 de mezcla por cada 50 kg de semillas empleando para esta dosificación el vaso medidor.
La mezcla inoculante + promotor de crecimiento + protector + curasemillas puede ser utilizada hasta 8 horas luego de preparada.
• Inocule las semillas respetando las dosis arriba indicadas.
• Una vez tratadas las semillas déjelas orear hasta notar que están secas al tacto y almacénelas hasta el momento de la siembra (hasta 10 días luego de coinoculadas y curadas).
Inoculation packs for peas
Para tratar las semillas hasta 15 días antes de la siembra.
Balde Arveja para tratar 2000 kg de semillas de arveja.
Presentación
Balde conteniendo:
• 2 vejigas de inoculante convencional ene-2 x 3000 cm3.
• 1 sachet Aditivo-protector eneDos x 850 cm3.
• 2 doy-packs de curasemillas eneDos x 1600 cm3.
• 1 botella de curasemillas metalaxil M. 35% x 250 cm3.
• 1 vaso graduado para dosificación.
• 1 instructivo.
Composición
Principio Activo: Rhizobium leguminosarum biovar viceae, seleccionadas por su capacidad de infección y gran efectividad.
Bacterias fijadoras de nitrógeno infectivas y eficientes para todas las variedades de arvejas cultivadas en el país.
Concentración mínima: 1 x 109 (1.000.000.000) células de Rhizobium leguminosarum biovar viceae por cm3 de inoculante hasta la fecha de vencimiento, infectivas y efectivas. Provee más de 600.000 bacterias vivas por semillas.
Dosis
Inoculante ene-2: 150 cm3 por cada 50 kg de semillas.
Aditivo-protector eneDos: 21,25 cm3 para preinocular hasta 15 días antes de la siembra.
Curasemillas eneDos: 80 cm3 por cada 50 kg de semillas.
Curasemillas Metalaxil M. 35%: 6,25 cm3 por cada 50 kg de semillas.
Forma de Aplicación
• Retire los sachets, la botella y el vaso medidor del interior del balde.
• Homogeinice el contenido de los envases agitándolos fuertemente.
• Vuelque el contenido de los envases de inoculante y protector dentro del balde.
• Mezcle ambos productos con una varilla limpia y deje actuar el protector por 15-20 minutos.
• Agregue luego el contenido de la botella de metalaxil y del sachet de curasemillas y agite nuevamente hasta obtener una mezcla homogénea.
• Este volumen de mezcla (10300 cm3) alcanza para preinocular y curar 2000 kg de semillas de arveja.
• Deben utilizarse aproximadamente 257,5 cm3 de mezcla por cada 50 kg de semillas empleando para esta dosificación el vaso medidor.
La mezcla inoculante + protector + curasemillas puede ser utilizada hasta 4 hs. luego de preparada.
• Inocule las semillas respetando las dosis arriba indicadas.
• Una vez tratadas las semillas déjelas orear hasta notar que están secas al tacto y almacénelas hasta el momento de la siembra (hasta 15 días luego de inoculadas y curadas).
Frozen rhizobia paste
it is obtained from the concentration, by centrifugation-filtration, of the rhizobia culture broths obtained in bioreactors. These frozen concentrates have a viable cell count of at least 1×1012 rhizobia / gram. These viable counts are maintained for prolonged periods of time (greater than one year) maintained at temperatures below -20 ° C.
These bacteria, once thawed, recover the physiological characteristics that they had in the original culture and, therefore, maintain their ability to nodulate and fix biological atmospheric Nitrogen in all legume species
These pastes are marketed to different countries and are consumed by companies dedicated to formulation of inoculants. What are the advantages of these products?
- Maintain their quality for prolonged periods of time
- Occupy at least 100 times less volume than the inoculant that can be produced from them, reducing freight costs significantly
- Any company, anywhere in the world, can dedicate itself to formulate high-quality inoculants with minimal investment in equipment and without the need for highly specialized staff
- Due to the small volume occupied, low shipping costs and preservation of the viability of the rhizobia, it offers the possibility of responding immediately to an unforeseen demand
It is marketed in 500g plastic containers coated with heat shrinkable material. The temperature is maintained below -20 ° C during transport (usually by plane) in suitable containers.
Frozen pastes are available for a large number of legume species, both grain and fodder
Growth Promoters
With Azospirillum brasilense.
Packaging
• 800 cm3 sachets in 10-sachet buckets.
Composition
Active principle: Azospirillum brasilense, selected for its growth promoting capacity in a wide range of crops.
Minimum concentration: 1 x 108 (100,000,000) Azospirillum brasilense cells per cm3 of bio-fertilizer.
Dose
• For wheat, corn and sorghum: 800 cm3 every 100 kg of seeds.
• For soya: 400 cm3 every 100 kg of seeds.
Application
To inoculate at sowing time: Mix the ene-2 growth promoter over the seeds, respecting the indicated dose.
To inoculate 100 kg of wheat up to 5 days before sowing:
1. Mix the 10 sachets of ene-2 Inoculant (800 cm3 each) with 3 sachets of eneDos Additive-protectant (800 cm3 each) in a bucket.
2. Let the mixture act for 15 to 20 minutes.
3. Add the seed fungicide for 1000 kg of seeds, respecting the indicated dose.
4. Inoculate the seeds.
5. Let them air-dry.
6. Sowing can be done up to 5 days alter inoculation.
NB: this technology is compatible with eneDos Seed fungicide (18.75% Tiram + 18.75% Carbendazim) or 6% Tebuconazol (Raxil 6FS) or 10% Triticonazole (Premis 10FS). With other seed curers, sowing must be done within 48 hours from seed treatment.
Storage
ene-2 Aqueous liquid concentrated growth promoter must be stored in its original package in a fresh and airy environment. Temperature should not be higher than 25ºC.
With Gluconacetobacter Diazotrophicus.
ene-2 growth promoter ene-2 Endophyte Plus has been formuled using Gluconacetobacter diazotrophicus. This microorganism efficiently colonizes the surface of radicles (rhizosphere) that arise from germination and it simultaneously penetrates the vegetable colonizing the internal tissues (endophytes) of roots, stalks and leaves. Its “Plus” effect comes from the fact that plant growth promotion is due to different complementary and synergic activities that take place in: a) the rhizosphere, since it is an active phosphorus dissolver solubilizer, and 2) the internal tissues, since, without other microorganisms competing it produces phytohormones inside the plant and can fix nitrogen from the air.
These activities cause a greater radicular development that permits the increase of water and nutrient capture and better availability, since it solubilizes phosphorus that is undissolvable from the rhizosphere, and can provide the colonized tissues with nitrogen. As a result, plants grow more vigorously, they are better-nourished and they have a better protection from other organisms in the soil.
Formulation
• 800 cm3 sachets in 10-sachet buckets.
Dose
400 cm3 of inoculant every 100 kg of wheat, barley, corn, sorghum, sunflower, soya and pastures.
Application
• It can be inoculated using any of the machines available for the treatment of seeds.
• Mix so that all the seeds are wet on the surface.
• In case of using seed curer, this must be applied before inoculation.
Recommendations
• Store in a fresh environment.
• Do not apply in strong sunshine.
• Once opened, the product must be used completely, since sterility is lost.
This product contains only Glu1 INTA Gluconacetobacter diazotrophicus strain (known as PAL5 ) and it is free from any other contaminating microorganism.
Composition
Active principle: Gluconacetobacter diazotrophicus, selected for its growth promoting capacity in a wide range of crops.
Minimum concentration: This product contains a minimum of 3 x 109 viable bacteria per cm3 at elaboration date and 5 x 108 per cm3 at expiration date.
Formulado con Gluconacetobacter diazotrophicus y Azospirillum brasilense.
Presentación
Caja conteniendo:
• 1 sachet de Endophyte Plus x 400 cm3.
• 1 sachet de Azospirillum brasilense x 800 cm3.
• 1 instructivo.
Composición
Principios Activos: Gluconacetobacter diazotrophicus y Azospirillum brasilense, seleccionadas por su capacidad de promoción del crecimiento en una gran diversidad de cultivos.
Concentración mínima: 3 x 109 (3.000.000.000) células de Gluconacetobacter diazotrophicus por cm3 de fertilizante biológico y 1 x 109 (1.000.000.000) células Azospirillum brasilense por cm3 de fertilizante biológico.
Dosis
Para maíz, sorgo y girasol: 400 cm3 de Endophyte Plus + 800 cm3 de Azospirillum brasilense por cada 100 kg de semillas.
Aplicación
Agitar bien ambos envases antes de abrirlos.
Para inocular en el momento de la siembra: Mezclar el contenido de ambos envases de Promotores de crecimiento ene-2 líquidos. Utilizar esta mezcla para inocular 100 kg de semillas.
Conservación
Los promotores de crecimiento ene-2 líquidos-acuosos deben conservarse en su envase original en ambientes frescos y ventilados. Es conveniente que la temperatura ambiente no supere los 25°C.
Compatibilidad
Los promotores de crecimiento ene-2 son compatibles con Curasemillas eneDos y aditivo-protector eneDos. Si va a utilizar cualquier otro producto consultar con el Dpto. Técnico de Laboratorios ARBO.
inoculants for different leguminous plants
There is a product for each of these leguminous plants:
- Alfalfa and melilotus
- Clover (white and red)
- Vicia and peas and lentils
- Lotus
- Peanuts
- Chickpeas
- others
Packaging
200 grams sachets (for 500 kg of seeds) in 20-sachet boxes.
Composition
Active principle: Sinorhizobium meliloti strains (for alfalfa and melilotus), Rhizobium leguminosarim bv viciae strains (for vicia and peas), Rhizobium trifolii strains (for clovers) and Mesorhizobium loti strains (for lotus) selected for their infection capacity and high-level efficiency.
Infectious and efficient nitrogen fixing bacteria for these varieties of leguminous plants.
Minimum concentration: 1 x 109 (1,000,000,000) infectious and efficient rhizobium cells per gram of inoculant till expiration date. It provides more than 300,000 live bacteria per seed in each of the species above mentioned.
Dose
200 g to treat 25 kg of seeds.
In areas that have not been sown with leguminous plants before: double dose (400 grams every 25 kg of seeds).
Application
For inoculation at sowing time, mix the moss peat-based inoculant with the seeds, respecting the indicated dose and mix until the product is equally distributed.
It is advisable to do the inoculation in a mixing drum or inoculation device, after having wet the seeds with water or sugared water before adding the inoculant. This way, the product can be equally distributed and adhered to the seeds.
Storage
ene-2 inoculants must be stored in their original bottle in a fresh and airy environment. Temperature should not be higher than 25ºC.
Compatibility
Compatible with eneDos Seed fungicide and eneDos Additive-protectant. In case of using any other product, ask the Technical Staff at ARBO Laboratories.
Protectant
Using eneDos additive-protectant permits treating (inoculating) seeds up to several months before sowing.
Product features:
• It prevents bacteria from drying once added to the seed surface.
• It adds the inoculated bacteria firmly to the seed tegument.
• It protects bacteria from the unspecified antibacterial action of seed fungicides.
• It provides bacteria with fast assimilation nutrients once into the soil.
Packaging
• 850 cm3 sachets in 12-sachet boxes (for soya pre-inoculation).
• 800 cm3 sachets in 12-sachet boxes (for pre-inoculation with Ene-2 growth promoter).
Composition
eneDos additive-protectant is a concentrated solution (more than 750 g/l) of sugars (mono-, di-, oligo- and polysaccharide) of natural origin. This solution is sterilized before packaging.
Dose
Follow the specifications on the table:
Period between | Protectant to be used every |
Up to 30 days | 170 cm3 |
Up to 21 days | 85 cm3 |
Up to 15 days | 42,5 cm3 |
Application
Follow instructions on ene-2 pre-inoculation packs.
Compatibility
eneDos additive-protectant has been developed to be used together with ene-2 inoculators and growth promoters. Therefore, it is compatible with these products and also with Ene-Dos seed curer.